102 This drive is an Hard disk.\nFormatting it will destroy all files\ncurrently on the drive.\nAre you sure you want to format this drive ?\n\nSelecting Yes a low-level format will start !\n\n
103 Message
104 Checking Disk media ...
105 Media Type =
106 Warning
107 ATTENTION: the source disk is NOT Write Protected !\nRemove the disk from the drive, protect it, reinsert and press Ok.
108 ATTENTION: the disk Boot Sector is NOT fully compliant !\nExecute the Boot Check if you want to known more details.\n\nDo you want proceed anyway ?
109 GRDUW fixed
110 Fatal Error
111 Cannot Repair Boot Sector !
113 Please insert a disk !
115 Error
116 Writing
117 Formatting
118 Reading
119 Comparing
120 A Source Diskette to Compare with wasn't Read !
121 \nThe selected file is NOT a Disk Image File !\n
122 The Source Disk Boot Sector is DAMAGED !
123 The Current Disk media is different from the current memory disk image.\n
125 Duplicating
127 Insufficient Memory !
129 Unrecognized Media
131 Verifying
137 Repairing
138 Write protect Disk !
139 Check failed !
140 Media UNKNOWN or Drive NOT Ready.
144 Failed !
149 Invalid Data !
150 Invalid Drive !
151 Drive NOT ready !
153 Disk Sector NOT found !
154 Address Mark NOT found !
155 Unknown Error !
156 Bad CRC !
157 Invalid disk change !
158 Insufficient Buffer Space !
159 Drive is already Locked !
161 Cannot Access the FAT !
162 A Source Diskette wasn't Read !
163 Error Message
164 You are trying to write to the Source Diskette!\nDo you want to proceed anyway ?\n
165 Destination Diskette is NOT empty!\nDo you want proceed anyway ?\n
166 Aborted !
167 \nThe Disk Image file corresponding media type is NOT supported !\n
168 Marking Track %d as BAD ...
175 Checking Boot Sector ...
176 Cannot Check !
177 Read error.
178 Write
179 File not found !
180 Access denied : disk read error or drive not ready !
1056 Verify every track after the format procedure
1057 Read data, Format and Write back data
1058 Read data, Mark the whole cylinder BAD and Write back data
1059 Read data, Mark track BAD and Write back data
1060 Display the error and STOP
1061 OK.
1062 WARNING: Invalid final signature.
1063 WARNING: Invalid initial op codes.
1065 ERROR: Invalid begin sector number.
1069 WARNING: Invalid file system name.
1070 ERROR: Invalid total number of sectors.
1071 Verify that the write is correctly done
1073 Writing System Area ...
1075 Write is complete: please remove the disk !
1076 Done !
1077 Format is complete: please remove the disk !
1078 This is the memory Image disk media type
1079 Insert a new disk to format !
1080 Invalid Volume Label Letter !\nValid characters are:\n'_', ' ', '$', '%', '\'', '-', '@',\n'~', '!', '(', ')', '{', '}', '#', '&'\nand any character whose code is > 127.\n
1083 Edit the current drive Volume Label.
1084 Set the Job Completed Sound.
1085 Set the Error sound.
1086 The current selected sound file.
1087 The current select error sound.
1088 Enable/Disable Hard disk drive access.
1089 Enable/Disable These tool Tips messages.
1090 Play the Job Completed sound.
1091 Play the Error sound.
1092 Sorry, this program doesn't run on Windows/NT !
1094 Bring the GRDuw window on topmost when finished.
1095 Allow to write/format multiple diskette without press any key.
1097 &Quit
1100 Automatically detect the media type
1102 80 tracks, 9 sectors, 112 root entries
1104 80 tracks, 18 sectors, 224 root entries
1105 80 tracks, 15 sectors, 224 root entries
1106 80 tracks, 21 sectors, 16 root entries
1107 82 tracks, 21 sectors, 224 root entries
1108 Verifying ...
1110 The disk into the drive does not match with that in the memory image !
1111 Detected Media =
1112 Boot OEM string =
1113 Physical Device =
1114 360K 5╝"
1115 1.2M 5╝"
1116 720K 3╜"
1117 Hard Disk
1118 Tape
1119 1.44M 3╜"
1120 Optical Disk
1121 2.88M 3╜"
1122 Unknown device!
1123 , fixed disk.
1124 , removable disk.
1125 DoubleSpace Compressed
1126 Wave Sound Files (*.wav)|*.wav||
1128 \Media
1129 \nInvalid Boot sector found !\n
1130 Fixing Boot sector ...
1131 \nCannot write the Boot sector !\n
1132 The Boot sector was fixed !
1133 Checking the system area ...
1134 Fixing the system area ...
1135 Cannot format/write the track !
1136 The system area was fixed !
1137 Checking the data area: Track %d of %d ...
1138 Marking cylinder %d as BAD ...
1139 Read / Format / Write track %d ...
1140 Reading Track %d of %d ...
1141 Formatting track: Tentative %1.1d ...
1142 Writing Track %d of %d ...
1143 Cannot execute Scandiskw !
1144 \nCannot change the Volume Label !\n
1145 FAT type =
1146 Text Files (*.txt)|*.txt|All Files (*.*)|*.*||
1147 Drive =
1148 Save information on a file
1149 Select a language
1151 Error: cannot read the Boot sector !
1152 <none>
1153 Hide all drives created by the SUBST command
1154 Boot Checked !
1155 Disk write failed !
1158 Stan&dard
1160 GR Disk Utility for Windows 95
1161 &About
1163 Wait ...
1164 Error: Cannot establish the media type !
1165 Volume Label =
1166 Cannot get the volume label (drive not ready ?)
1167 &Abort
1168 &Finish
1169 This drive type is not supported !
1170 &Optimized
1171 Unrecoverable disk error !
1172 This is the comment you have assigned to the Image file
1173 View the current disk contents
1174 Read and write only not empty tracks
1175 \nCannot view the disk contents: the drive is not ready or the disk is not readable !\n
1176 Display results report
1177 Boot Sector Status :
1178 System Area Status :
1179 Data Area Status :
1180 Repair Report
1181 GRDuw Version
1182 Passed
1183 Stopped
1184 If you register this program before 1 March 1998, you will pay ONLY 25US$ instead of 29US$.\n\nDon't lose this extraordinary opportunity !
1185 Removable Optic.
1186 Removable HD
1187 Network
1188 Cd-Rom
1189 Ram Drive
1190 Comparing Track %d of %d ...
1191 Formatting Track %d of %d ...
1192 Physical drive = %2.2xh
1193 Special Format tuning option.
1194 Format Gap Test ...
1195 Best Format Gap = %d
1196 Change the Format Gap to find the best performance
1197 Format Gap value for 1.72Mb and 1.68Mb media
1198 Testing
1199 Cannot test this media type for Gap Format
1200 Always format before to write a disk
1202 Special Virus check on the boot sector
1203 Warning: disk serial number must be different from zero.
1205 Save collected information on a text file.
1206 The following file cannot be opened:
1207 You cannot duplicate a removable HD into a diskette !\n
1208 System device information taken from your registry
1209 System Information Report
1210 No Errors.
1211 Error on track %d ->
1212 Display the report dialog at the end of format and repair operations.
1213 Here are listed the detailed disk information
1214 The DLL version of the language you have selected does not match the executable one !\n\nPlease get the latest release from Internet: http://www.grsoftware.net
1215 Format Report
5021 USE This Program on NOT VITAL DATA at YOUR OWN RISK !\n\nYou can run this evaluation version for a period of 30 days.\nAfter this time period you MUST delete this program or register it.\nTo register and get your personal registration key file, press the\n[Register Info] button and read the instructions, or go to compile\nthe registration form by pressing the [Register Now] button.\n\nPress the F1 key to get the program on-line user manual.\n
5022 About
5023 EXPIRED Shareware Program Version !
5024 \nRemember that after the 30 days trial period\nyou must register this program if you want\nto continue to run it!\n
5025 USE THIS PROGRAM AT YOUR OWN RISK!\n\nAlways backup important data before using this program!\nIf you want to suggest improvements or report defects, please email to: grsoft@kagi.com\n\nOR snail mail to:\nRoberto Grassi, P.O.BOX 48\nLeumann 10096, Torino, ITALY.\n
5026 Cannot Execute the software registration program !
5027 Warning Message
5028 Thank you to be a registered user.
5029 A read error was found at sector %d
5030 A write error was found at sector %d
5031 Set a special compatibility format mode for 1.68Mb and 1.72Mb disks.
5033 It can happen that on some systems you cannot be able to format as 1.68Mb or 1.72Mb. If this happen, please try to enable the "Format in compatibility mode (slower)" check box that you find into the Format Dialog and try again. If also in this case the program do not work, please email your detailed report to support@grsoftware.net .
